Shop by project
Power tools by project
Hang a TV, build a deck, cut trim, demo a wall, drill block, sand and refinish.
Shop by project
Tell us what you're building, hanging or tearing out and we'll steer you to the tool that fits the job instead of the biggest kit on the shelf. Here's what each job usually takes.
Hang shelves, TVs & cabinets
Find the stud, drill clean, and drive anchors without cracking the drywall.
- Cordless drill/driver
- Stud finder
- Drill bit set
- Level
- Wall anchors
Build or repair a deck
Long exterior screws all day — this is impact driver work, not drill work.
- Impact driver
- Circular saw
- Star-drive bits
- Speed square
- Extra battery
Trim, doors & baseboard
Clean miters and tight joints come from a fine-tooth blade and a sharp finish nailer.
- Miter saw
- 80-tooth finish blade
- Brad nailer
- Oscillating tool
- Caulk
Demo & remodel
Cut nails, pipe and studs where a saw won't reach — then break up what's left.
- Reciprocating saw
- Demolition blades
- Pry bar
- Angle grinder
- Dust mask
Concrete, block & stucco
South Florida walls are block. Masonry bits and a hammer setting are non-negotiable.
- Hammer drill or rotary hammer
- Carbide masonry bits
- Tapcon screws
- Shop vac
- Eye protection
Sand & refinish
The paint counter's other half — good prep is what makes the finish coat look right.
- Random orbit sander
- Sanding discs (80/120/220)
- Dust mask
- Tack cloth
- Shop vac